What is an UPVC injection molding machine

Home → PVC Injection Molding Machine

PVC Injection Molding Machine for PVC / CPVC / PPR Fittings

  • Specially designed for PVC,UPVC,CPVC,PVC Powder, Bi-alloy Screw & Barrel. Stabilized temperature increasing rate from charging. Highly efficient plasticizing rate and stable injection molding. Product quality is excellent.
  • High-Torsion/ Low- Rotation Hydraulic Pump. Efficient plasticized capacity. Reduce Cooling – time & Material- consumption.
  • Specially designed for hard PVC mold, widened the plate metal,, convenient to mold installation. Reduce customer cost, increasing the safety of the operator.
  • Adopted solid state relay to control temperature and ensure accurate temperature.
  • Two groups of core-pulling, two in and two out of each group.
  • Imported variable pump or servo drive control, energy saving is remarkable.
  • Standard with fan and wind cover, make sure small material temperature deviation.
  • Multiple sets of core-pulling and stainless steel screw are optional.

PVC-90V/S ~ PVC-200V/S

DescriptionUNITPVC-90V/S PVC-120V/SPVC-128V/SPVC-160V/SPVC-200V/S
International Size900-3001200-3001280-4061600-6042000-934
CLAMPING UNIT
Clamping forceKN9001200128016002000
Opening strokemm320350350440490
Max.daylightmm6807507509401040
Platen sizemm540×540610×610610×610705×705775×775
Bars distancemm360×360410×410410×410460×460510×510
Max.mold heightmm360400400500550
Min.mold heightmm130145145160230
Ejector strokemm100100100140140
Ejector forceKN3442424949
INJECTION UNIT
Screw diametermm30/3636/4236/4242/4646/52
Screw L/D ratio22/2223/2223.3/2222/2223/22
Injection pressureMpa266/185205/150259/190213/177230/180
Shot volumecm3113/163183/249183/249284/341407/520
Shot weight (PVC)g135/194218/297218/297338/405485/619
Injection rateg/s70/10191/12487/119133/160155/198
Plasticizing capacityg/s15/2218/2521/3032/3530/37
Screw strokemm160180180205245
Screw speedr.p.m.155135160180146
POWER UNIT
Hydraulic pressureMpa17.517.517.517.517.5
Pump motor powerKW1111111518.5
Heater powerKW67.889.811.5
GENERAL
Dry-cycle timesec.1.51.51.51.81.8
Oil tank capacityL180200210260340
Machine weightTon2.863.263.864.585.88
Machine dimensionm3.8×1.35×1.74.0×1.45×1.84.2×1.45×1.84.8×1.45×1.85.75×1.9×2.1

PVC-288V/S ~ PVC500V/S

DescriptionUNITPVC-288V/S PVC-330V/SPVC-400V/SPVC-500V/S
International Size2880-13413300-19024000-24955000-3514
CLAMPING UNIT
Clamping forceKN2880330040005000
Opening strokemm550600710830
Max.daylightmm1160130014401680
Platen sizemm850×850985×9851050×10501260×1260
Bars distancemm610×610670×670740×720820×780
Max.mold heightmm610700730850
Min.mold heightmm280300300300
Ejector strokemm145180210220
Ejector forceKN7777110135
INJECTION UNIT
Screw diametermm52/6060/6868/7575/83
Screw L/D ratio22222222
Injection pressureMpa226/169217/169208/171204/167
Shot volumecm3595/792877/11261198/14581723/2110
Shot weight (PVC)g708/9421043/13401426/17352050/2511
Injection rateg/s225/299306/393355/432450/552
Plasticizing capacityg/s35/5052/6561/7276/90
Screw strokemm280310330390
Screw speedr.p.m.132147106110
POWER UNIT
Hydraulic pressureMpa17.517.517.517.5
Pump motor powerKW22303745
Heater powerKW14.2182228
GENERAL
Dry-cycle timesec.3.03.24.05.8
Oil tank capacityL420460630810
Machine weightTon8.2610.915.118.7
Machine dimensionm6.2×2.0x2.26.8×2.2×2.37.2×2.3×2.38.7×2.7×2.3

What you can get:

  • Main Characteristic for PVC Elbow Injection Molding Machines
  • Main Technical Parameters of PVC Elbow Injection Molding Machines
  • Platen Dimensions Details for all Models of PVC Injection Machines
  • A Production Case for your reference
Content for Tab 3 goes here…